Sash-Weights - Make-Weights - Add-Weights - Add-Ons

Sash-Weights - Make-Weights - Add-Weights - Add-Ons from A. I. Sash Window Repair & Renovation Services

By: A. I. Sash Window Repair & Renovation Services  11/04/2009
Keywords: Sash Window Repair, sash weights, sashwindows

Make-Weights - Add-Weights - Add Ons - Are terrms used for supplemental lead weights that can be added to the existing sash-weights to balance sliding sash windows.

Make-Weights - Available - increments of - 1/2Ib - 1Ib - 2Ib
38mm Diameter - (10mm hole through the centre to thread sash cord)

It is vital that sash windows are balanced with the correct weights to ensure they work efficiently. Imbalance occurs when replacement glass is heavier than the original material. Original cylinder type glass would have been 1.6mm - 3mm,  in our experience, we find most replacement glass used is 4mm - 6mm clear float.If your sash windows need balancing, a sash window service would be recommended, as you would need to dismantle the window to carry out this procedure,  old sash cords could be replaced, excessive paint removed, re-alignment of sashes carried out, pulley;s lubricated, staff & parting beads re-adjusted or renewed, and of coarse the balancing of the windows.  

Makeweights Supplied to - TRADE or D.I.Y.

Sash-Weights Available - Standard Sizes 30mm - 38mm - 45mm - 50mm (Round or Square) 
From 1/2lb (0.22kg) to 70lb (31.75kg)


Keywords: Add weights, sash weights, Sash Window Repair, sashwindows,

Contact A. I. Sash Window Repair & Renovation Services


Print this page