Liqui Moly Uk
oil, garages, engine oil
Pro-Line Engine Flush
Pro-Line Engine Flush is a development product based on highly effective stateof-
the-art additive technology. These highly effective detergent and dispersant
additives in association with the carrier fluid have been tested in the laboratory
and in practical field trials for their ability to dissolve sludge and lacquer formers.
All types of oil-soluble and oil-insoluble residues are brought into suspension
and removed during the next oil change. An engine which has been cleaned of
deposits and contamination and which is then filled with fresh oil not
contaminated with old impurities can develop its full performance
- gentle and rapid cleaning
- neutral to seals and other materials installed in the engine
- compatible with catalytic converters
- highly economical
- no additional environmental pollution
- simple to use
Cleaning and flushing out the oil systems of petrol and diesel engines.
One 500 ml can is sufficient for up to 5 litres of oil. Add Pro-Line Engine Flush to
the engine oil at running temperature before changing the oil. After adding the
product, allow the engine to idle for approx. 10 to 15 minutes depending on the
degree of contamination. Then change the oil and the filter.
Pro-Line Engine Flush is compatible with all commercially available engine oils
Not suitable for use on motorbikes with wet clutches.
, engine oil
, Liqui moly