Electric thermal store 160 Litres

Electric thermal store 160 Litres from ADVANCE APPLIANCES LT

By: ADVANCE APPLIANCES LT  22/09/2015
Keywords: heating systems, water heating, hot water

A new cylinder style thermal store with a separate cold section - it can be installed without a discharge if preferred. Perfect for modern apartments or the all electric home, this hot water system gives you the benefits of mains pressure hot water. Designed with modern lifestyles in mind, installation is simple, maintenance is low and the unit is compact. The hot water store works on the thermal store principle of using a bank of heated water with an efficient internal heat exchanger connected to the mains for safe fast showering and bath filling. It will deliver enough hot water for one bath and one shower on a single overnight charge. The unit is fitted with a hot water control pack and two 3kw immersion heaters. It should be connected to low tariff supply and used during appropriate periods for maximum efficiency. It is made from stainless steel for long life and has been upgraded to 60mm insulation thickness to exceed Part L of the Building Regulations.

Keywords: heating systems, hot water, Hot Water Cylinder, water heating

Other products and services from ADVANCE APPLIANCES LT

Thermal store indirect with cold section twin coil from ADVANCE APPLIANCES LT thumbnail
23/09/2015

Thermal store indirect with cold section twin coil

Use these Advance Thermal Stores for the provision of fast, safe hot water provision throughout the house.


Thermal store direct with cold section single coil from ADVANCE APPLIANCES LT thumbnail
23/09/2015

Thermal store direct with cold section single coil

Use these Advance Thermal Stores for the provision of fast, safe hot water provision throughout the house.


Vented thermal store indirect cylinder only twin coil from ADVANCE APPLIANCES LT thumbnail
23/09/2015

Vented thermal store indirect cylinder only twin coil

Use these Advance Thermal Stores for the provision of fast, safe hot water provision throughout the house.


Vented thermal store direct cylinder only single coil from ADVANCE APPLIANCES LT thumbnail
23/09/2015

Vented thermal store direct cylinder only single coil

Use these Advance Thermal Stores for the provision of fast, safe hot water provision throughout the house.


Buffer from ADVANCE APPLIANCES LT thumbnail
22/09/2015

Buffer

Advance offer a range of stainless steel buffer cylinders from 80 litres to 3000 litres, insulated and cased. Buffers can be used as energy accumulators or to add volume to primary circuits to prevent heat pump shorting.


Heat pump cylinders from ADVANCE APPLIANCES LT thumbnail
22/09/2015

Heat pump cylinders

The heat pump coils have large surface areas to get the best heat transfer, also they are designed for low resistance and the coils are positioned within the cylinder to lower return temperatures.


EnergyManager Sealed system thermal store from ADVANCE APPLIANCES LT thumbnail
22/09/2015

EnergyManager Sealed system thermal store

The Advance EnergyManager is a tried and tested design with an internal heat exchanger and shunt pump arrangement resulting in delivery of hot water equivalent to the volume of the tank at 43ºC.


Multi fuel universal thermal store from ADVANCE APPLIANCES LT thumbnail
22/09/2015

Multi fuel universal thermal store

The SFUTS pre plumbed pre wired Universal Thermal Store has been designed to link a number of heat sources including gas and oil boilers, solid fuel appliances, and solar as well as electric and other inputs.


Electric combi boiler from ADVANCE APPLIANCES LT thumbnail
22/09/2015

Electric combi boiler

Designed to be used in modern apartments, this stainless steel electric combi boiler provides mains pressure hot water and self commissioning open central heating.