Decorative floor Birmingham

By: PB Flooring  26/03/2014
Keywords: Decorative Floor finishes

Having laid the underfloor heating and liquid screed at a Builders house he decided that he wanted a decorative floor screed instead of tiles. Having arranged for the Mapei rep to visit the site with some colour samples to show the customer the decision was taken to go with the anthracite colour. The floor was sanded again to remove any lose bits or contamination such as paint, plaster or grease, it was then thoroughly vacuumed out to remove all lose material and dust. Once the floor had been vacuumed the flowing stages were then completed. 1. The floor was given a coat of primer using a short haired roller. 2. While the primer was still wet we then covered it with a mesh to help the screed bond to the base. 3. Another coat of primer was then applied over the mesh and thoroughly covered with 1.2 quartz, again this was done to help adherence to the floor. 4. The primer was then given 24 hours to fully dry before all the excess quartz was swept and vacuumed off. 5. Once the floor was clear we then proceeded to lay the anthracite ultratop using paddle mixers to mix the screed using exactly the same amount of water in each mix too prevent too much variation in the colour. 6. Once the screed was laid it was then levelled using a screed rake and spikey roller. 7. The floor was then given 24 hours to cure before a coat of sealer was applied to protect it from staining. 8. 24 hours after the first coat of sealer was applied a second coat was then applied to finish the floor.

Keywords: Decorative Floor finishes

Other examples of best work from PB Flooring

Liquid Screed at The Cube in Birmingham from PB Flooring thumbnail

Liquid Screed at The Cube in Birmingham

The Cube, Birmingham - Liquid Screed – 330m2, 55mm depth. PB Flooring were employed to install insulation and liquid screed