Chimney Cowl Bird Guard

Chimney Cowl Bird Guard from ASA Metal Products

By: ASA Metal Products  10/09/2009
Keywords: chimney, chimney sweep, Chimney Cowls

  • Supplied with Jubilee Clip and strap for fixing
  • Cowls are suitable for gas and solid fuel fires, please remember to state which one you require when purchasing
  • Manufactured here in the UK using quality galvanized steel, the design has been modified to to fit different sized chimney pots.
  • The Bird Guard is spot welded to the side prongs, this then gives more strength to the whole structure enabling the prongs to be pushed in or pulled out to accommodate the diameter of the chimney.
  • Suitable for Chimney Pots with a diameter of between:

   190mm to 280mm - 7.5" to 11"  

  • Diameter of the top Cowl - 330mm/13 inch
  • Depth of Bird Guard 135mm/ 5 1/4 inch
  • Height from base of prong to recess 100mm/4inch
  • Total height is approx 270mm/10.5 inch
  • Used to prevent rain entering the chimney along with the protection of a Bird Guard
  • Simply align the three prongs onto the outside of your chimney pot, the hat will then rest on the horizontal return edge at the top of the chimney.
  • Suitable for Chimney Pots with a diameter of between:

   190mm to 280mm - 7.5" to 11"  

  • Diameter of the top Cowl - 330mm/13 inch
  • Depth of Bird Guard 135mm/ 5 1/4 inch
  • Height from base of prong to recess 100mm/4inch
  • Total height is approx 270mm/10.5 inch
  • Used to prevent rain entering the chimney along with the protection of a Bird Guard
  • Simply align the three prongs onto the outside of your chimney pot, the hat will then rest on the horizontal return edge at the top of the chimney.
  • BESPOKE SERVICE AVAILABLE.

Keywords: bird guard, chimney, Chimney Cap, Chimney Cowl, Chimney Cowls, chimney sweep

Contact ASA Metal Products

Email

Print this page