Best Selling Engine Sealant Powertrain Products

Best Selling Engine Sealant Powertrain Products from Techsil

By: Techsil  17/11/2014
Keywords: motorsports, Engine Sealant, engine silicone,

ThreeBond has been manufacturing and supplying the Automotive Industry with Adhesives & Sealants for nearly 60 years and is the world’s largest global supplier of RTV liquid gaskets for automotive powertrain. Originally founded to reduce energy waste and pollution surrounding automobiles, ThreeBond has grown into a vast international company who supply a wide range of materials covering a variety of applications and manufacture across 18 production sites around the world - today ThreeBond products are used on more than half of all cars and commercial vehicles produced in the world. Techsil are the sole distributors for ThreeBond in the UK – working closing together to ensure customers receive the very best technical knowledge, advice and fastest possible supply chain. It is difficult to focus on any particular products from ThreeBond’s extensive range of materials, however here in the UK there are four powertrain products which do stand out from the crowd! Three of which are OEM Approved Automotive specific silicone based grades which are heavily used within the Motorsport Industry for engine sealing applications – TB1215, TB1217H, TB1207B. The fourth is TB1184; an oil resistant solvent based semi-drying gasket sealant. TB1215 is a grey semi-fluid liquid silicone gasket which offers excellent adhesion to oily surfaces, an effective temperature range of -60°C to +250°C and gives outstanding mechanical resistance against vibration. It is ideal for applications where a long, faultless seal is absolutely critical. Recommended for sealing flange surfaces, screw sections and of course, preventing oil, water, gasoline and chemical leaks. Available in 250gm tubes. TB1217H is a grey non-slump paste silicone gasket with very high elongation and is recommended by most Japanese automotive and motorcycle OEM’s. TB1217H offers resistance for all engine oil grades and has an effective temperature range similar to the TB1215 above. It possess superior pressure resistance just after application and assembly, making it perfect for sealing complex T-joint surfaces of cylinder blocks, oil pans and timing covers with large clearances to prevent oil, water, gasoline and chemical leaks. Available in 310ml cartridges. TB1207B is a non-slump black, solvent free, silicone liquid gasket which is extremely fast curing and is resistant to engine oil and long life coolants. As with the products above, TB1207B gives outstanding mechanical resistance against vibration and operates between -60°C to +250°C. It is recommended for all automotive, motorcycle, watercraft, snowmobile and ATV engines and available in 100gm tubes. TB1184 is a grey visco-elastic semi-drying sealer which is resistant to oil, water, gasoline and chemicals. It has a very high padding property, making it excellent for sealing surfaces with poor flatness or large gaps. This product provides superb resistance to vibration and impact and is recommended for applications such as sealing transmission case covers, motorcycle cases, timing chain cases, clutch housing bolts and oil filter mounting surfaces. TB1184 forms a semi-drying rubber which maintains stable between -40°C to +150°C and is available in 100gm & 200gm tubes. Find 10% discount on all ThreeBond RRP’s at www.techsil.co.uk until 1st December 2014

Keywords: Engine Sealant, engine silicone, high elongation silicone, motorsports, oil resistant silicone, TB1184, TB1207B, TB1215, TB1217H,

Other news and updates from Techsil

Techsil Introduce New Materials for LED Assembly & Manufacture from Techsil thumbnail
28/09/2016

Techsil Introduce New Materials for LED Assembly & Manufacture

The need for LED encapsulants is rising dramatically and the requirements are high! Engineers are looking for products offering brilliant clarity, high brightness, along with excellent thermal characteristics. Techsil provide a wide range of materials for LED assembly that provide protection from harsh environmental factors such as moisture ingress, vibration, scratches and thermal shock.


Take the Heat out of TV & Film Prop/Set Design with Flame Retardant Polyurethanes! from Techsil thumbnail
30/08/2016

Take the Heat out of TV & Film Prop/Set Design with Flame Retardant Polyurethanes!

When designing props or sets for TV or Films safety is always a vital consideration. New Flame Retardant PU's from Techsil not only reduce the risk of a fire starting, but also contain a fire nearby!


MG Chemicals Soldering Supplies Added to the Techsil Electronics Online Range! from Techsil thumbnail
21/07/2016

MG Chemicals Soldering Supplies Added to the Techsil Electronics Online Range!

Techsil announces an agreement to supply M.G. Chemicals’ high performance range of electrical adhesives and sealants; bringing new additions to the Techsil category ranges!


The Portability of Hot Melt Glue Guns is re-invented thanks to RYOBI® Battery Technology from Techsil thumbnail
12/01/2016

The Portability of Hot Melt Glue Guns is re-invented thanks to RYOBI® Battery Technology

New Hotmelt Glue Gun is RYOBI® Battery Powered, Fully Portable, Easy to Use and Quick to Charge


Thermally & Electrically Conductive Adhesives Cure in Minutes with Revolutionary Snap-Curing System from Techsil thumbnail
06/11/2015

Thermally & Electrically Conductive Adhesives Cure in Minutes with Revolutionary Snap-Curing System

Techsil introduce new adhesives with improved conductivity to the UK market. Jet dispense compatibility and snap cure make these conductive adhesives the ideal choice for high speed production.


Techsil Introduce SnapSil TN8000 - A Flame Retardant & Reliable Silicone Sealant from Techsil thumbnail
14/10/2015

Techsil Introduce SnapSil TN8000 - A Flame Retardant & Reliable Silicone Sealant

SnapSil TN8000 is an exciting high performance silicone sealant which not only offers flame retardency, but also is extremely stable in storage applications meaning this is the perfect choice for electrical potting applications with an unknown expiry date. Manufactured by Momentive Performance Materials, SnapSil offers high strength, elongation and impressive dielectric properties.


Innovative Polycarbonate & Plastic Adhesive Utilises UV and Visible Light! from Techsil thumbnail
23/09/2015

Innovative Polycarbonate & Plastic Adhesive Utilises UV and Visible Light!

Techsil® presents Vitralit® UV 4050 LV, a new low-viscosity, transparent adhesive for polycarbonate, plastic, glass and metal bonding. This inspiring new product can be easily integrated in automated production lines.


Polyurethane & Epoxies have never smelt better! Introducing a Vanilla Resin Additive from BJB from Techsil thumbnail
16/09/2015

Polyurethane & Epoxies have never smelt better! Introducing a Vanilla Resin Additive from BJB

BJB Enterprises is set to take the PU and Epoxy industry by storm with their new innovative fragrance additive! Companies throughout the SFX Industry are eagerly awaiting their samples and Techsil Ltd, BJB's UK Distributors, are very excited for this to land with them later in September!


Techsil Bond Difficult Substrates in Automotive Seating Application from Techsil thumbnail
15/04/2015

Techsil Bond Difficult Substrates in Automotive Seating Application

The increasing demand for more comfort, quality and visual appeal for automotive interiors as well as economical and environmental aspects are the key drivers for automotive interiors designers when selecting new textiles, fabrics or new decorative trim solutions. Some of these new materials can be difficult to bond and require advanced adhesive assembly technologies to enable customers to meet current and future interior automotive specifications.


Techsil makes it easy to bond polycarbonate, ABS and PET with UV adhesive. from Techsil thumbnail
09/01/2015

Techsil makes it easy to bond polycarbonate, ABS and PET with UV adhesive.

In November 2014 Panacol exhibited at Compamed in Duesseldorf, Germany. Alongside displaying their already very impressive medical adhesive portfolio, they had something much more exciting up their sleeves - they introduced a brand new medical grade adhesive which wowed fellow exhibitors and visitors alike - Vitralit® 7041 MV!


Techsil Launch Exciting New Industrial Cyanoacrylates from Techsil thumbnail
10/11/2014

Techsil Launch Exciting New Industrial Cyanoacrylates

Techsil have recently increased their rapid-cure cyanoacrylate range - the most exciting addition is CA03 in 50gm bottles. Techsil CA03 is an innovative product that solves the main problems associated with the use of cyanoacrylates – odour and whitening!


New Aerospace Tape Range from Techsil from Techsil thumbnail
23/10/2014

New Aerospace Tape Range from Techsil

Techsil have extensive knowledge when it comes to supplying the aerospace and defence industries with material to meet the stringent demands and specification set by the industries. They now offer an innovative range of tapes, for both flying and non-flying applications.


Momentive RTV100 - Tough FDA Silicone Sealants Tried and Tested! from Techsil thumbnail
05/09/2014

Momentive RTV100 - Tough FDA Silicone Sealants Tried and Tested!

The RTV100 series are a family of one-component, ready-to-use adhesive silicone rubber sealants which are extremely versatile, tough, durable and resilient. These grades have more than earned their place as RTV bestsellers; they have clearly stood the test of time and are still technically advanced silicone solutions!


Buy Discounted ThreeBond Products Online from a UK supplier! from Techsil thumbnail
27/08/2014

Buy Discounted ThreeBond Products Online from a UK supplier!

Techsil are now offering all of their customers an introductory* 10% discount off all ThreeBond RRP’s when products are purchased online.