CentroMatic™ "single-line" automated lubrication systems
Lubrication Systems Limited
lubrication systems, oil pumps, Lubricators
CentroMatic™ "single-line" lubrication systems are made to match your application. Systems can lubricate one machine, different zones on one machine, or even several separate machines.
Regardless of the application, the principle of centralised lubrication remains the same: a central pump automatically delivers lubricant through a single supply line to a series of injectors. Each injector serves only one lubrication point and may be accurately adjusted to deliver the precise amount of grease or oil required.
CentroMatic™ "single-line" systems give you multiple advantages over other designs:-
SimplicitySystems are easy to understand, install and maintain. You realise savings right from the start because one lubricant supply line means lower installation costs.
Powerful Pumping UnitCentroMatic™ systems dispense either grease or oil in measured quantities, unaffected by normal temperature or viscosity changes. For large systems, our "single-line" design and powerful pumps mean injectors can be located long distances from the oil drum or grease barrel.
External AdjustmentLubricant injectors are externally adjustable without special tools so each bearing can receive the correct amount of lubricant. No under- or over-lubrication at individual points.
Visual IndicatorsEach injector incorporates an indicator pin that gives visual confirmation the injector is operating correctly. When necessary, troubleshooting is the simple process of checking indicator pins.
Ease of ServiceWhen injectors finally need service, the job is quick and easy. No need to remove supply line connections or disturb adjacent injectors. Replacement can usually be done between lubrication cycles, so there’s almost no lubricant loss or downtime.
, centralised lubrication
, grease pumps
, greasing systems
, lubrication systems
, oil pumps