AGME provides the best tube end forming machines with the most advanced assembly technology. This special purpose machine joins the links to the tube using a quick, reliable and cost effective tube endforming technology.
It is composed of the following features:
· One rigid welded base frame
· Twotube end forming units, each one composed of:
“U” welded frame
Set of tube holding and assembly clamps
Fixture for positioning the links
One AGME Hydraulic Press PH-50
Set of tube end forming fixtures
One device with 3 positions for the links assembly and for doing the tube end
forming on both sides of the link.
- One ejection mechanism with two tube endforming slide charriots, one endformed tube removal charriot to a ramp and one fixture lubrication mechanism
After the tube and links are manually loaded into the fixture, the cycle starts. The tube is centered and held with clamps. Then the first tube endforming operation between the clamps and the links is performed. After that the second tube enforming between the link and the endforming fixture is done. Finally, the part is removed and the tube endforming fixtures are lubricated.