Car dealers the Chambers Group in Tamworth is now open sporting a brand new showroom tiled floor; fitted by J B S (Tiling Contractors) Ltd. using Ultra Floor subfloor preparation products and Ultra Tile adhesive.
J B S (Tiling Contractors) Ltd. secured the floor tiling installation project to be completed as part of the dealership’s partial refurbishment. The project included the removal and replace of tiles covering the 180m² showroom floor.
Subfloor preparation was required to ensure adequate and protected installation of the tiles. Ultra Floor Prime IT AR, an acrylic polymer emulsion primer suited for use over porous substrates was applied first followed by Ultra Floor Level IT one HDB a single part concrete levelling compound.
The primer prepares the surface, enhancing adhesion and sealing it. The bond strength of subsequent cement based levelling compounds to the surface will then be dramatically improved, enhancing durability.
Prime IT AR is easy to use and safe to apply, and boasts excellent surface penetration and a fast drying time.
Ultra Floor Level IT one HDB has a working time of 20-30 minutes and will set within 2-3 hours. It can be applied at thicknesses from 3-50mm and a 25kg bag covers an optimum 5m²at 3mm. The product is protein and ammonia free, shrinkage compensated and polymer modified.
Suitable for use on most common substrates including concrete, sand/cement screeds, flooring grade asphalt, floors with under floor heating and fixed timber floors, it can be applied by trowel or pump.
Expertly formulated with exceptional bond strength, flexibility and fast setting capabilities, Ultra Tile ProRapid RS was an ideal choice of adhesive for this project.
The adhesive can be applied at a bed thickness of between 3-12mm on walls or floors. Its open time is 40 minutes and it will be set after just 2 hours drying time.
The product is suitable for both wet and dry conditions and is formulated to adhere to most common substrates including screwed and fixed over-boarded wooden floors. It can be used internally or externally.
High polymer content increases the product’s flexibility and ensures its compatibility with under floor heating systems.
Ultra Tile ProRapid RS conforms to the requirements of EN 12004 Class C2FT and is available in 20kg grey or white.
The Tamworth dealership is now displaying its fabulous range of new vehicles on an equally striking showroom floor.
To contact J B S (Tiling Contractors) Ltd., please call 01384 443213.
For more information on Ultra Tile’s range of tile adhesives, grouts and ancillaries, please visit .
Ultra Tile is part of the Instarmac Group plc.