Alumasc Ventilated System

Alumasc Ventilated System from Alumasc Facades

By: Alumasc Facades  07/10/2014
Keywords: Render, renders, Render System

The Alumasc Ventilated System is fully tested and has an effective life of between 25 & 60 years The system is detailed to provide a fully ventilated cavity as per TRADA recommendations, keeping the substrate dry and free from moisture All finishes used have high impact resistance, can be used in zones below 1.5m and pedestrian thoroughfares and are UV stable Can facilitate positive and negative wind loads of 2.0kPa. Calculations can be provided for areas of higher wind loads The system is fire resistant. Both the board and renders are class A1 to BS13501-1. Finishes range from B1 to DIN 4102-16 to B-s1, d0 to BS13501-1 Render carrier boards are easy to cut, moisture resistant, rodent resistant, mould resistant and non-hazardous Applications Suitable for timber framed construction New-build and/or fastrack building programmes Off-site manufacture Renders & Brick Slips ST Silkolitt Silicone Render, available with a rolled surface texture, in a wide range of colours M.R. Polymer Dashing Render, in a range of colours, with complementary aggregates Alumasc Acrylic Brick Slips can be selected from a standard range or bespoke slips can be manufactured to replicate existing substrates Installation & Maintenance Quick to install, compared to traditional construction methods and suitable for off-site manufacture Installed by a national network of Alumasc registered specialist contractors Requires minimal routine maintenance

Keywords: Render, Render System, renders, ventialted system

Other products and services from Alumasc Facades

Masonry Paint from Alumasc Facades thumbnail
07/10/2014

Masonry Paint

M.R. S6 Masonry Paint is a high performance coating that produces a smooth, durable finish when applied to virtually any dry, clean and solid background.


Silicone Facade Paint from Alumasc Facades thumbnail
07/10/2014

Silicone Facade Paint

Alumasc’s Silicone Façade Paint offers the special benefits of a silicone based coating to independent application over virtually any clean and sound substrate.


Acrylic Brick Slips from Alumasc Facades thumbnail
07/10/2014

Acrylic Brick Slips

The Alumasc Acrylic Brick Slip system offers an easy to apply, lightweight, high performance realistic brick finish, where the use of real bricks would not be viable.


Traditional Brick Slips from Alumasc Facades thumbnail
07/10/2014

Traditional Brick Slips

The Alumasc Traditional Brick Slip system offers an easy to apply, high performance real brick finish, where the use of real bricks would not be viable.


Rendabrick Brick Effect from Alumasc Facades thumbnail
07/10/2014

Rendabrick Brick Effect

M.R. Rendabrick is a two-coat, polymer cement render system which simulates the appearance of real brickwork. It is applied over existing masonry.


Polymer Plain Render from Alumasc Facades thumbnail
07/10/2014

Polymer Plain Render

M.R. Polymer Plain Render can be applied as a one or a two-coat render system, depending on project requirements. It is ideal for coating large elevations and creating feature bands on building facades.


Polymer Dashing Render from Alumasc Facades thumbnail
07/10/2014

Polymer Dashing Render

M.R. one-coat polymer cement dashing renders are available in a range of colours, complemented by a choice of aggregate dash finishes.


07/10/2014

Mineral Render

Eco-friendly, thin-coat Mineral Render K is manufactured from natural material and is available with a rolled texture to create a contemporary finish.


Mineral Render from Alumasc Facades thumbnail
07/10/2014

Mineral Render

Eco-friendly, thin-coat Mineral Render K is manufactured from natural material and is available with a rolled texture to create a contemporary finish.


Silicone Render from Alumasc Facades thumbnail
07/10/2014

Silicone Render

Alumasc’s thin-coat ST Silkolitt silicone renders are used to create a contemporary finish in both new-build and re-modelling applications


07/10/2014

Swisspan EWI

A BBA approved, fully warranted, external wall insulation system with an effective life in excess of 30 years


Swisspan EWI from Alumasc Facades thumbnail
07/10/2014

Swisspan EWI

A BBA approved, fully warranted, external wall insulation system with an effective life in excess of 30 years - See more at:


Swisrail EWI from Alumasc Facades thumbnail
07/10/2014

Swisrail EWI

An NHBC compliant, fully warranted, external wall insulation system with an effective life in excess of 30 years


Swistherm EWI from Alumasc Facades thumbnail
07/10/2014

Swistherm EWI

A BBA approved, fully warranted external wall insulation system with an effective life in excess of 30 years