High voltage test system HVTS-70/50

High voltage test system HVTS-70/50 from KEP Power Tetsing Ltd.

By: KEP Power Tetsing Ltd.  23/10/2015
Keywords: high voltage testing equipment, properties of power cables, solid dielectrics

The test system HVTS-70/50 is: - Supplies the high voltage test on the object and control of leakage current; - Ensures high accuracy and maintenance of the test voltage at a certain level, it is possible to adjust the leakage current with an external capacitor additional DC voltage during the test; - Measures the voltage directly at the load, allowing you to have a real idea about the stress tests on the object and control it with the specified accuracy. In addition, significantly increasing the safety of the staff, especially when removing the residual capacitive charge when disconnecting the high voltage; - Made in a sealed enclosure provides protection for remote control from dust and moisture, which is especially important when using the machine in the field; - Equipped with a modern system of removal of residual capacitive charge using the secondary winding of the transformer and has an optional external shorting; - A protection scheme on excess input and output current limit and set the output voltage exceeds the set. HVTS-70/50 has the ability to program required for a particular test value of the maximum current and maximum voltage protection circuitry; - High voltage unit has a built-in pressure sensors and temperature sulfur hexafluoride transformer with output of their state on the graphic display; - The ability to save the settings of the eight most commonly performed types of testing (insulators, surge protectors, switches, cables, 6.3 kV, 10 kV cables, etc.); - Display all the necessary information on the specifications and test results on a graphical display. During the test, shows the numerical values ​​of the test voltage (rms), test current (rms) and the timer duration of the test. Additionally displays the voltage (amplitude), the shape factor for AC voltage or crest factor for the rectified voltage. An estimation of the dynamics of changes in the test parameters displayed a linear scale display of voltage and current; - A choice between manual and automatic operation. The latter involves the installation of the operator values ​​of the test voltage in steps of 0.1 kV, lifting speed of the test voltage, the voltage test current protection operation time of the test; - Preservation of the non-volatile memory of archival records of tests carried out with information about the time of the test, the averaged voltage at the facility and the leakage current; - The ability to work remotely - reading the archived data on the tests carried out, the setting and the choice of test parameters, workflow management

Keywords: high voltage testing equipment, properties of power cables, solid dielectrics

Contact KEP Power Tetsing Ltd.

Email

Print this page

Other products and services from KEP Power Tetsing Ltd.

Digital impulse reflectometer RIF-9 from KEP Power Tetsing Ltd. thumbnail
23/10/2015

Digital impulse reflectometer RIF-9

Digital impulse reflectometer RIF-9 is designed for determining the distance to a fault in communication and power cables.


Automatic circuit breaker tester UPA-3 from KEP Power Tetsing Ltd. thumbnail
23/10/2015

Automatic circuit breaker tester UPA-3

Automatic circuit breaker tester UPA-3 is designed for testing and ampere-second characterization of automatic AC current circuit breakers. The device allows registering the value of the supplied current and timing the automatic circuit breaker switching interval.


High Voltage Tester HVT-70/50 from KEP Power Tetsing Ltd. thumbnail
23/10/2015

High Voltage Tester HVT-70/50

High Voltage Tester HVT-70/50 is designed for testing the insulating properties of power cables and solid dielectrics with a rectified voltage of up to 70 kV, and solid dielectrics with sine-wave voltage of up to 50 kV at 50Hz frequency.


Oil tester OLT-80A from KEP Power Tetsing Ltd. thumbnail
23/10/2015

Oil tester OLT-80A

The internal design of OLT testers combined with a use of automatic high voltage breakers, cutting off supplied voltage if tester’s lid has been opened during the test, provide operator with high level of safety.


Oil tester OLT-80M from KEP Power Tetsing Ltd. thumbnail
23/10/2015

Oil tester OLT-80M

Oil tester OLT-80M is designed for determining the breakdown voltage of the transformer oil and other liquid dielectrics in accordance with IEC 60156 and other standards.