Automatic circuit breaker tester UPA-3

Automatic circuit breaker tester UPA-3 from KEP Power Tetsing Ltd.

By: KEP Power Tetsing Ltd.  23/10/2015
Keywords: Automatic circuit breaker tester, ampere-second characterization of automatic

Automatic circuit breaker tester UPA-3 is designed for testing and ampere-second characterization of automatic AC current circuit breakers. The device allows registering the value of the supplied current and timing the automatic circuit breaker switching interval. UPA-3 is a mobile device, which could be easily transported to a required testing location. UPA-3 operates on the principle of varying the power in the primary circuit of the matching power transformer and, respectively, varying the output current, flowing through the automatic circuit breaker under the test. Power regulation could be done either through an external regulator (RNO or VR) or through a built-in thyristor controller.

Keywords: Automatic circuit breaker tester, ampere-second characterization of automatic

Contact KEP Power Tetsing Ltd.

Email

Print this page

Other products and services from KEP Power Tetsing Ltd.

Digital impulse reflectometer RIF-9 from KEP Power Tetsing Ltd. thumbnail
23/10/2015

Digital impulse reflectometer RIF-9

Digital impulse reflectometer RIF-9 is designed for determining the distance to a fault in communication and power cables.


High voltage test system HVTS-70/50 from KEP Power Tetsing Ltd. thumbnail
23/10/2015

High voltage test system HVTS-70/50

High voltage test system HVTS-70/50 is designed for testing the insulating properties of power cables and solid dielectrics with a rectified voltage of up to 70 kV, and solid dielectrics with sine-wave voltage of up to 50 kV at 50Hz frequency in accordance with GOST 1516.2.


High Voltage Tester HVT-70/50 from KEP Power Tetsing Ltd. thumbnail
23/10/2015

High Voltage Tester HVT-70/50

High Voltage Tester HVT-70/50 is designed for testing the insulating properties of power cables and solid dielectrics with a rectified voltage of up to 70 kV, and solid dielectrics with sine-wave voltage of up to 50 kV at 50Hz frequency.


Oil tester OLT-80A from KEP Power Tetsing Ltd. thumbnail
23/10/2015

Oil tester OLT-80A

The internal design of OLT testers combined with a use of automatic high voltage breakers, cutting off supplied voltage if tester’s lid has been opened during the test, provide operator with high level of safety.


Oil tester OLT-80M from KEP Power Tetsing Ltd. thumbnail
23/10/2015

Oil tester OLT-80M

Oil tester OLT-80M is designed for determining the breakdown voltage of the transformer oil and other liquid dielectrics in accordance with IEC 60156 and other standards.