BW and BRUK line : welded or assembled metallic retention bund for medium voltage transformers
oil, Fire, fire protection
BRW Line – WELDED RETENTION BUNDS
For 100 to 3,150 kVA transformers as standard. Inductance oils, capacitors, etc... when transformer is new or can be lifted on site.
BRUK Line – ASSEMBLED RETENTION BUNDS
For 100 to 3000 kVA transformers as standard, inductance oils, capacitors, etc... Tanks specially designed to be installed under existing equipment, only requiring transformers to be lifted a few centimetres.
Liquid tightness is assured by a high temperature resistant silicone pre punched strip seal.
Other parts are bolted together using liquid high temperature resistant silicone seal.
Outdoor use Kit composed of: Siphon an Petro-PITÒ :
filtration system of FILTRELEC® range fitted to the bund wall allowing rainwater to drain whilst trapping traces of hydrocarbon
(additional documentation available on request);
Sound dampening blocks to be placed under the bund
(plates or springs for 99% absorption);
Insulating PTFE plates.
Internal beam to raise the transformer above rain water.
, distribution transformers
, electric motors
, Electric Transformer
, Electric Transformers
, Electrical Engineers
, environmental solutions
, fire protection
, High Voltage Transformers
, Low Voltage
, oil retention
, Oil Spill Response
, pollution control
, power transformers
, retention bund
, retention pit
, transformer bund
, transformer bunding
, Used Oil