Mobile Van and Car Battery Replacement

By: Mobile Car Brake Service  11/09/2014
Keywords: vehicle repair, auto repairs, automobile repair

Common battery faults include: * Shorted cell due to failure of the separator between the positive and negative plates * Shorted cell or cells due to build up of shed plate material building up below the plates of the cell * Broken internal connections due to corrosion * Broken plates due to vibration and corrosion * Low electrolyte * Cracked or broken case * Broken terminals * Sulfation after prolonged disuse in a low or zero charged state Corrosion at the battery terminals can prevent a car from starting, by adding electrical resistance. The white powder sometimes found around the battery terminals is usually lead sulphate which is toxic by inhalation, ingestion and skin contact. The corrosion is caused by an imperfect seal between the plastic battery case and lead battery post allowing sulphuric acid to attack the battery posts. The corrosion process is also expedited by over-charging. Corrosion can also be caused by factors such as, salt water, dirt, heat, and humidity in the air, a crack in the battery casing, or loose battery terminals. Inspection, cleaning, and protection with a coating are measures used to prevent corrosion of battery terminals.

Keywords: auto brake repair, Auto brakes, auto repairs, automobile repair, automotive parts, Automotive Repair, Brake pads, Car Batteries, car battery, car brake repair, Car Service & Repairs, clutch repair, engine repair, vehicle repair

Other products and services from Mobile Car Brake Service


Car Clutches Car & Van Clutch Replacement

Modern vehicles today we are not so lucky car clutch replacement can be up to three or nine hours to replace depending on which make and model of vehicle you own. Some other conditions have made the cost of clutch more expensive to the customer conditions such as car manufacturers have adopted hydraulic clutch pedal meaning there is no clutch cable anymore it's all done by hydraulic master and slave cylinders and fluid this is not for all vehicles but most of them.


Mobile Timing Belt Replacement

Where possible the recommended intervals have been compiled from vehicle manufacturers' information. In a few instances no recommendation has been made by the manufacturer and the decision to replace the belt must be made from the evidence of a thorough examination of the condition of the existing belt.


Mobile Car Diagnostic Service

CAN bus is a fairly new system and internationally standardised: ISO 11898. Originally developed by Bosch, it consists of only two cables, making the likelihood of error very remote. In order to read the data, which is transferred at speeds of up to 1MB per second, an adapter is required. Experienced car diagnostic technicians carry one of these on them. It is not advised for car owners not experienced in diagnostics to attempt to access this system in any other way. Probably the greatest differ


ECU Performance Remapping Car & Van Fuel Economy ECU Remaps

We have extended their service to include mobile performance tuning also known as ECU remapping (chip Tuning) we decided to invest in the most advanced mobile Remapping Equipment after many customers asked if we could offer this service we pleased to announce we now can offer custom remap for petrol and diesel vehicles (Cars/Vans), We have created a relationship with best remapping writer in the UK with over 30 years experience in high end performance tuning on and off the race