ASTM A53 Pipe,ASME SA53 Pipe

ASTM A53 Pipe,ASME SA53 Pipe from sunnysteel

By: sunnysteel  28/09/2014
Keywords: steel pipe, ASME SA53 Pipe, ASTM A53 Pipe,

ASTM A53 Standard specification covers Seamless and Welded, Black and Hot-Dipped Galvanized nominal (average) wall pipe for coiling, bending, flanging and other special purposes and is suitable for welding. The steel for both seamless and welded pipe shall be made by one or more of the following processes: open-hearth, electric furnace, or basic-oxygen. The weld seam of electric-resistance welded pipe in Grade B shall be heat treated after welding. A53 pipe comes in three types and two grades A53 Type F, which is longitudinally furnace butt welded or continuous welded (Grade A only) A53 Type E, which is longitudinally electric resistance welded (Grades A and B) A53 Type S, which is seamless pipe, produced by hot working, and possibly cold finishing, the steel (Grades A and B). ASTM A53, Type S is now currently an outdated specification and has been replaced by ASTM A106 specification for seamless carbon steel pipe.

Keywords: ASME SA53 Pipe, ASTM A53 Pipe, seamless steel pipe,, steel pipe,

Other products and services from sunnysteel

Pipe elbows from sunnysteel thumbnail
02/06/2016

Pipe elbows

Pipe elbows, pipe fitting elbow, elbow fittings, Long radius pipe elbows, Short radius pipe elbows, Stainless pipe elbows, Big diameter


Short radius pipe elbows from sunnysteel thumbnail
02/06/2016

Short radius pipe elbows

Short radius pipe elbows,Short radius elbow, SR elbow,SR 90 degree elbow, SR 180 degree elbow We have adopted advanced production


Reducing tee from sunnysteel thumbnail
02/06/2016

Reducing tee

Reducing tee, Seamless Reducing tee, Erw reducing tee, High pressure reducing tee, Carbon steel reducing tee, Pipe Tee Suppliers Size


Pipe tee, Tee fittings from sunnysteel thumbnail
02/06/2016

Pipe tee, Tee fittings

Pipe tee, Tee fittings, pipe tee fittings, Pipe Tees, LT, Lateral tee , RT, Reducing tee, Steel Pipe Tee,Brass Pipe


Barred Tee from sunnysteel thumbnail
02/06/2016

Barred Tee

Barred Tee, Seamless Barred Tee, Erw Barred Tee, High pressure Barred Tee, Carbon steel Barred Tee , Pipe Tee Suppliers


Equal tees from sunnysteel thumbnail
02/06/2016

Equal tees

Equal tees, Pipe tee, Tee fittings, Pipe Tees, LT, Lateral tee , RT, Reducing tee, Steel Pipe Tee,Brass Pipe Tee,


Equal tees from sunnysteel thumbnail
02/06/2016

Equal tees

Equal tees, Pipe tee, Tee fittings, Pipe Tees, LT, Lateral tee , RT, Reducing tee, Steel Pipe Tee,Brass Pipe Tee,


Stainless steel Tees from sunnysteel thumbnail
02/06/2016

Stainless steel Tees

Stainless steel tee, Stainless tee, Stainless steel Equal tees, Stainless steel Reducer tees Product Types: Tee - Equal & Reducing


Pipe cross, Cross fittings from sunnysteel thumbnail
01/06/2016

Pipe cross, Cross fittings

A pipe cross is a kind of pipe fitting. It is used in the place where four pipes meet together.


End Cap, Cap fittings from sunnysteel thumbnail
01/06/2016

End Cap, Cap fittings

End Cap, Carbon Steel cap, Stainless Steel Caps, ANSI, ISO, JIS and DIN Standards, Measures 1/2 to 56 Inches. carbon


Pipe Reducer from sunnysteel thumbnail
01/06/2016

Pipe Reducer

Reducer is a kind of fitting that be used for reducing piping size. Concentric reducer is most commonly used and


01/06/2016

Stainless reducer

Stainless reducer, Reducer, Seamless reducer, Steel reducer, Carbon Steel Seamless reducer, Concentric reducer Reducer is a kind of fitting that


Concentric Reducer from sunnysteel thumbnail
01/06/2016

Concentric Reducer

Concentric Reducer, Seamless concentric reducer, Butt-welded concentric reducer, High pressure concentric reducer, Low pressure concentric reducer Reducer is a kind


Eccentric reducer from sunnysteel thumbnail
01/06/2016

Eccentric reducer

Eccentric Reducer, Large size eccentric reducer, Butt-welded Eccentrice reducer, Butt-welded Eccentrice reducer, Welded Eccentric reducer Reducer is a kind of


Stub end from sunnysteel thumbnail
01/06/2016

Stub end

Stub Ends are fittings used in place of welded flanges where rotating back up flanges are desired. They are also