ASTM A213 T11 Seamless alloy pipe

ASTM A213 T11 Seamless alloy pipe from sunnysteel

By: sunnysteel  01/06/2016
Keywords: ASTM A213 T11, ASTM A213 T11 Seamless alloy pipe, Seamless Alloy Pipe,

ASTM A213 T11 is the part of ASTM A213 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, Heat-Exchanger Tubes. ASTM A213 T11 ASTM A213 T11 Standard covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes. Grades containing the letter H in their designation have requirements different from those of similar grades not containing the letter H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements. ASTM A213 T11 tubes shall be made by the seamless process and shall be either hot finished or cold finished, as specified. Grade TP347HFG shall be cold finished. Heat treatment shall be done separately and in addition to heating for hot forming. The ferritic alloy and ferritic stainless steels shall be reheated. On the other hand, austenitic stainless steel tubes shall be furnished in the heat-treated condition. Alternatively, immediately after hot forming, while the temperature of the tubes is not less than the minimum solution temperature, tubes may be individually quenched in water or rapidly cooled by other means. Tension test, hardness test, flattening test, and flaring test shall be done to each tube. Also, each tube shall be subjected to the nondestructive electric test or hydrostatic test. ASTM A209 Through A213 Other standard specifications include the categories of A209 seamless carbon-molybdenum alloy-steel boiler and superheater tubes; A210 seamless medium-carbon steel boiler and superheater tubes and A213 seamless ferritic and austenitic steel boiler, superheater and heat-exchanger tubes. Piping wall thicknesses range from 1/2 inch to 5 inches. A213 grades also have the letter H or M assigned, which changes the composition and specifications for that series. This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

Keywords: ASTM A213 T11, ASTM A213 T11 Seamless alloy pipe, Seamless Alloy Pipe,

Other products and services from sunnysteel

Pipe elbows from sunnysteel thumbnail
02/06/2016

Pipe elbows

Pipe elbows, pipe fitting elbow, elbow fittings, Long radius pipe elbows, Short radius pipe elbows, Stainless pipe elbows, Big diameter


Short radius pipe elbows from sunnysteel thumbnail
02/06/2016

Short radius pipe elbows

Short radius pipe elbows,Short radius elbow, SR elbow,SR 90 degree elbow, SR 180 degree elbow We have adopted advanced production


Reducing tee from sunnysteel thumbnail
02/06/2016

Reducing tee

Reducing tee, Seamless Reducing tee, Erw reducing tee, High pressure reducing tee, Carbon steel reducing tee, Pipe Tee Suppliers Size


Pipe tee, Tee fittings from sunnysteel thumbnail
02/06/2016

Pipe tee, Tee fittings

Pipe tee, Tee fittings, pipe tee fittings, Pipe Tees, LT, Lateral tee , RT, Reducing tee, Steel Pipe Tee,Brass Pipe


Barred Tee from sunnysteel thumbnail
02/06/2016

Barred Tee

Barred Tee, Seamless Barred Tee, Erw Barred Tee, High pressure Barred Tee, Carbon steel Barred Tee , Pipe Tee Suppliers


Equal tees from sunnysteel thumbnail
02/06/2016

Equal tees

Equal tees, Pipe tee, Tee fittings, Pipe Tees, LT, Lateral tee , RT, Reducing tee, Steel Pipe Tee,Brass Pipe Tee,


Equal tees from sunnysteel thumbnail
02/06/2016

Equal tees

Equal tees, Pipe tee, Tee fittings, Pipe Tees, LT, Lateral tee , RT, Reducing tee, Steel Pipe Tee,Brass Pipe Tee,


Stainless steel Tees from sunnysteel thumbnail
02/06/2016

Stainless steel Tees

Stainless steel tee, Stainless tee, Stainless steel Equal tees, Stainless steel Reducer tees Product Types: Tee - Equal & Reducing


Pipe cross, Cross fittings from sunnysteel thumbnail
01/06/2016

Pipe cross, Cross fittings

A pipe cross is a kind of pipe fitting. It is used in the place where four pipes meet together.


End Cap, Cap fittings from sunnysteel thumbnail
01/06/2016

End Cap, Cap fittings

End Cap, Carbon Steel cap, Stainless Steel Caps, ANSI, ISO, JIS and DIN Standards, Measures 1/2 to 56 Inches. carbon


Pipe Reducer from sunnysteel thumbnail
01/06/2016

Pipe Reducer

Reducer is a kind of fitting that be used for reducing piping size. Concentric reducer is most commonly used and


01/06/2016

Stainless reducer

Stainless reducer, Reducer, Seamless reducer, Steel reducer, Carbon Steel Seamless reducer, Concentric reducer Reducer is a kind of fitting that


Concentric Reducer from sunnysteel thumbnail
01/06/2016

Concentric Reducer

Concentric Reducer, Seamless concentric reducer, Butt-welded concentric reducer, High pressure concentric reducer, Low pressure concentric reducer Reducer is a kind


Eccentric reducer from sunnysteel thumbnail
01/06/2016

Eccentric reducer

Eccentric Reducer, Large size eccentric reducer, Butt-welded Eccentrice reducer, Butt-welded Eccentrice reducer, Welded Eccentric reducer Reducer is a kind of


Stub end from sunnysteel thumbnail
01/06/2016

Stub end

Stub Ends are fittings used in place of welded flanges where rotating back up flanges are desired. They are also