Portable Moulding System

Portable Moulding System from Teledyne Impulse-PDM Ltd

By: Teledyne Impulse-PDM Ltd  26/01/2009
Keywords: design, cable assemblies

PDM Neptec has developed a RoHS compliant portable moulding system that uses a temperature controlled Quickcure Mould Heater (QMH) to drastically reduce cure time compared to moulding at ambient temperature for cable repairs whilst in the field. Do not return to base - save time by doing the repair there and then.

PDM Neptec supply two versions of the QMH, a 1-slot and a 4-slot. The 1-slot has been developed for large moulds. The 4-slot enables a different slots to be used simultaneously with different tools occupying the slots. WIth the 4-slots being in transverse orientation it is ideal for producing a number of small moulds simultaneously. The QMH measures  450mm  by 150mm by 120mm and weighs about 10kg.

The QMH is CE marked with full RoHS compliance and PDM Neptec are a WEEE producer with an Environment Agency approved scheme.

The QMH is available in 110V AC and 220V AC versions and is supplied with; power lead, mould tool seperator, mould separating wedge, and an aluminium flight case with pre-cut protective internal foam padding.


Keywords: cable assemblies, design

Contact Teledyne Impulse-PDM Ltd

Email

Print this page