Alfa Laval appoints Lubriserv as UK Distributor for its mobile centrifuge separators

Alfa Laval appoints Lubriserv as UK Distributor for its mobile centrifuge separators from LUBRISERV LTD

By: LUBRISERV LTD  02/12/2010
Keywords: machining, filtration, industrial lubricants

LUBRISERV LTD are now proud to be working with Alfa Laval and promoting sales of the ALFIE 500 and EMMIE 2 high speed fluid separators for the metalworking industry. 

ALFIE 500 for Efficient coolant cleaning of tramp oil and particles Centrifugal cleaning of coolants

Recycling of coolants
For the metalworking industry, coolants are a major expense. Some are obvious: Replacing them – a messy and time consuming task. Disposing of them – a continually rising expense in the face of today’s environmental regulations.But dirty coolants also incur other less obvious but no less expensive costs. For example, tramp oil and solid particles in coolants can cause increased tool wear, quality problems during later processing and health problems for your personnel.

These mobile systems are highly efficient and can reduce manufacturing costs significantly by:-
>Reducing coolant consumption by 80%
>Substantially increasing tool life
>Improving surface finish and tolerances
>Almost eliminating coolant waste Cleaner parts – easier to measure, easier to clean
>Reducing downtime
>Improving the working enviroment and health and safety issues  

The EMMIE 2 for neat oils - hydraulic, compressor, metalworking etc
Water or particles in oil causes most hydraulic system breakdowns. Alfa Laval’s upgraded, compact mobile separator unit Emmie.2 for industrial use cleans a range of commonly used oils, including hydraulic oils and lube oils in a single easy operation. The separator removes 99% of particles in the 2-5 micron range while it also can remove virtually all free water, even at high initial water contents. The result is more production uptime as well as reduced wear and corrosion on the equipment serviced, the process is so efficient that the service life of the oil can be prolonged many, many times. Emmie is designed for “plug and go” operation. The unit is plugged in to a single-phase power source, the hoses are connected to the oil tank and the unit is ready for operation. Choose the viscosity of the oil to bee cleaned and press the start button. Dirty oil is pumped from the tank, cleaned and then recirculated. The module can be easily wheeled around between oil tanks, to serve many different oil tanks. The system incorporates a screw pump, a PLC control and a built in electric heater, which heats the oil to reach optimum viscosity prior to purifying. -->    

For more information contact LUBRISERV LTD: 01302 723131 or visit us at  

Keywords: CNC coolant, cold heading, Coolants, cutting oils, filtration, industrial lubricants, machining, Manufacturing Lubricants, Metalworking Fluids, neat cutting oils