Rotary Geared Flow Divider Combiners

Rotary Geared Flow Divider Combiners from Related Fluid Power Ltd

By: Related Fluid Power Ltd  23/10/2012
Keywords: Hydraulic equipment, fluid

Designed to accurately divide flow from a single hydraulic source into two or more separate output flows.

Flow Divider and Combiner - Unlike most valve type flow dividers P Series rotary geared flow dividers will also combine return flows to allow the synchronising of actuators in both directions of movement.Equal, mixed and multi-section. Dependant on the type of unit flows from 2 to 600 litres can be divided exactly in two or up to a maximum of eight equal or proportionately mixed flows.
A Flow Divider as an Intensifier - By off loading one output from a two-section flow divider to tank enables service output pressure to be intensified. The ratio of the displacements of the flow divider sections is a measure of the amount of intensification obtained.
Flow Dividers with Integral Reliefs - To allow a “lagging” cylinder to “catch up” during mid stroke. P Series flow dividers can be supplied with integral differential reliefs which relieve back into the inlet gallery of the unit. This differs from service line reliefs relieving to tank to allow cylinders to catch up at the end of stroke.
Proven design, stable material selection and precise machining are the keys to quiet reliable performance in a variety of applications. High strength permanent mould cast iron housing .Precision needle bearings. Hardened shafts joined by internally hardened round keys and keyways to eliminate stress concentrations and wear. Precise machined trapping relief grooves provide constant filling and discharging to assure quiet operation and maximum bearing life. O-ring seals between sections. Precision dowel pin alignment between sections.

Proven Design - Precision Made - Quiet - Durable - Reliable.

Keywords: fluid, Hydraulic equipment

Contact Related Fluid Power Ltd


Print this page

Other products and services from Related Fluid Power Ltd

Cartridge Valves from Related Fluid Power Ltd thumbnail

Cartridge Valves

We use a wide range of “screw in” and “drop-in” cartridge valves in our manifold blocks and all of these are available as individual cartridges or are available in standard bodies for line mounting.

Hydraulic Manifold Systems from Related Fluid Power Ltd thumbnail

Hydraulic Manifold Systems

Related Fluid Power is a market leader in the innovative design and manufacture of Hydraulic Manifold Assemblies.

Hydraulic Mini Power Units from Related Fluid Power Ltd thumbnail

Hydraulic Mini Power Units

Compact, quiet & efficient hydraulic mini power units.