Compression Testing Machine

By: Cooper Technology  06/07/2011
Keywords: Utm, Gyratory Compactor, Asphalt Compaction

 

The Compression Testing machine CRT-CTM250-II was developed to perform a variety of compressive strength tests including Duriez, Indirect Tensile Strength and Marshall Stability.

A rigid floor-standing test frame with bench-height working surface, twin columns and adjustable height cross-head houses a hydraulic cylinder with a load capacity of up to 300kN. The movement of the cylinder is controlled by custom software with feedback from either the stroke transducer or the load cell fixed to the cross-head. During testing, the machine operator is protected by a safety enclosure.



Read more:

Keywords: Asphalt Compaction, bitumen testing, cooper technology, Gyratory Compactor, Utm,

Contact Cooper Technology

Email

Print this page

Other products and services from Cooper Technology

06/07/2011

Hydraulic Standard Roller Compactor-Dual size

  The Roller Compactor is considered to be the method of laboratory specimen compaction that results in slabs of asphaltic


06/07/2011

Auto Lift Arm ECO Wheel Tracker

  Wheel tracking is used to assess the resistance to rutting of asphaltic materials under conditions which simulate the effect


06/07/2011

Indent Testing Machine

  Auto data logging software available, which: Reduces operator involvement Eliminates chances of error Generates graphical representation of the test


06/07/2011

Cooper-Vialit Cohesion Pendulum

  Vialit Cohesion Pendulum by Cooper CRT-VCP is a testing device to analyse the cohesion of bitumen in road construction.


06/07/2011

Large Hydraulic Four Point Bending Machine

  The Large Hydraulic Four Point Bending Machine CRT-LH4PT-BB uses advanced servo-hydraulic technology and a high-speed digital data acquisition and


06/07/2011

Servo-Hydraulic Universal Testing Machine

  The Servo-Hydraulic Universal Testing Machine CRT-UTM-HYD is a well designed, inexpensive machine specifically developed for the testing of materials used


16/12/2010

Servo-Pneumatic Universal Testing Machine

  Low cost dynamic loading universal test system ideally suited to testing asphalt and unbound granular materials. Double acting low friction actuator with integral stroke transducer. Utilises high performance ceramic spool servo-valve. High quality stainless steel frame. Issued with UKAS accredited certificate of calibration for EN 12697-24, EN 12697-25, EN 12697-26. Accessories available to perform a range of standard and non standard test methods. Can be supplied