Stack Emission Monitoring - VCEM5000 Flue Gas Flow Analyser

Stack Emission Monitoring - VCEM5000 Flue Gas Flow Analyser from Codel International

By: Codel International  26/03/2009
Keywords: monitoring equipment, analyzer, gas analysis

 Continuous emission monitoring often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream.The VCEM5000 provides non-contact measurement of gas velocity using a time-delay correlation of flue gas infrared emissions received by two detectors spaced a fixed distance apart. Gas velocities ranging from 1m/sec to 50m/sec can be measured. The technique is suitable for all combustion gases including hot gases and gases with a high dust burden. The VCEM5000 integrates directly into the CODEL SmartCEM system.

Codel International Ltd are one of the UK's leading suppliers of Stack Emission Monitoring - VCEM5000 Flue Gas Flow Analyser, for more information on Stack Emission Monitoring - VCEM5000 Flue Gas Flow Analyser please visit our website (www.codel.co.uk/cems_emission_monitoring_products_fluegasanalyser_vcem5000_integrated.htm) or call us on 01629 814351 and we will be happy to assist with your Stack Emission Monitoring - VCEM5000 Flue Gas Flow Analyser requirements.

Keywords: analyzer, Flue Gas, Flue Gas Monitoring, gas analysis, Gas Monitor, monitoring equipment

Contact Codel International

Email

Print this page