EGR Delete

EGR Delete from Quantum Tuning Ltd

By: Quantum Tuning Ltd  08/05/2013
Keywords: EGR Removal, EGR Software Delete, EGR Software Removal,

A widely adopted route to reduce NOx emissions is Exhaust Gas Recirculation (EGR). This involves recirculating a controllable proportion of the engine's exhaust back into the intake air. A valve is usually used to control the flow of gas, and the valve may be closed completely if required.

The substitution of burnt gas (which takes no further part in combustion) for oxygen rich air reduces the proportion of the cylinder contents available for combustion. This causes a correspondingly lower heat release and peak cylinder temperature, and reduces the formation of NOx. The presence of an inert gas in the cylinder further limits the peak temperature (more than throttling alone in a spark ignition engine).

The gas to be recirculated may also be passed through an EGR cooler, which is usually of the air/water type. This reduces the temperature of the gas, which reduces the cylinder charge temperature when EGR is employed. This has two benefits- the reduction of charge temperature results in lower peak temperature, and the greater density of cooled EGR gas allows a higher proportion of EGR to be used. On a diesel engine the recirculated fraction may be as high as 50% under some operating conditions.

Modern engines recirculate some of their exhaust gases back into the engine with the aim of reducing emissions.

This is the is the main benefit of the EGR system. The downside is that exhaust fumes containing carbon deposits are constantly being recirculated through the engine through time causing a build up of carbon deposits in the intake manifold etc.

These deposits sometimes contribute to the failure of the EGR system itself. Replacement EGR valves can be expensive and in the case of high mileage engines the continual carbon build up can eventually lead to total engine failure.

Removal of the EGR system by banking off the exhaust input and reprogramming of the engine managment ECU results in lowered engine temperatures, improved throttle response and economy and also can lengthen engine life by reducing oil contamination and carbon deposits.

Keywords: EGR Removal, EGR Software Delete, EGR Software Removal,

Other products and services from Quantum Tuning Ltd

TDCI Remap from Quantum Tuning Ltd thumbnail

TDCI Remap

TDCI means Turbo Diesel Common rail Injection. Instead of having a distributor pump with a separate pipe to each injector, the common rail is just that. A single pipe (or rail) connected to all four injectors. The fuel is allowed through only when the ECU triggers the injector. These common rail systems run at extremely high pressures (in excess of 25,000psi) so please do not attempt to dismantle one unless you have the relevant experience. You might very well seriously injure or kill yourself!

TDI Remap from Quantum Tuning Ltd thumbnail

TDI Remap

Turbocharged Direct Injection or TDI is a design of turbo diesel engines, which feature turbo charging and cylinder-direct fuel injection, developed and produced by the Volkswagen Group. These TDI engines are widely used in all mainstream Volkswagen Group marques of passenger cars and light commercial vehicles produced by the company (particularly those sold in Europe). They are also used as marine engines - Volkswagen Marine, and Volkswagen Industrial Motor applications.

OBD Remap from Quantum Tuning Ltd thumbnail

OBD Remap

In the engine tuning industry, three phrases are often used interchangeably. These are: 'OBD Tuning', 'Chip Tuning' and 'ECU Remapping'. OBD stands for On Board Diagnostic. To make sense of this the word port is important because without the port, on board diagnostics would not actually exist; just as it didn't exist in the 1980's. So any 'OBD port tuning' or 'obd port remap' is just engine tuning or engine remapping completed via the use of the car's obd port.

Bosch Remap from Quantum Tuning Ltd thumbnail

Bosch Remap

Electronic Diesel Control (EDC) is an electronic engine-management system for diesel engines. Bosch presented the first system of this kind for passenger cars in 1986. Since 1989 it has also been used in commercial vehicles, where it has now become part of today’s standard equipment. EDC combines all control and regulation functions in one electronic engine control unit to which the injection system and a large number of sensors and actuators are connected.

DPF Removal from Quantum Tuning Ltd thumbnail

DPF Removal

DPF remaps will now alter the software in the ECU (Engine Control Unit) so that in combination with physically removing the DPF, the vehicle will now run without logging any error codes, attempting any future regeneration, or bringing any DPF check lights or engine management light on the dash.

ECU Remap from Quantum Tuning Ltd thumbnail

ECU Remap

ECU Remapping means we re-program your vehicle's brain OR ECU to give you more power, torque & better MPG.

Quantum Green from Quantum Tuning Ltd thumbnail

Quantum Green

Quantum Green is designed to return an improved economy in turbo diesel engines. By re -characterizing the torque limits on the engine, at lower rpm’s you will benefit from additional performance and improved economy.

Quantum Red from Quantum Tuning Ltd thumbnail

Quantum Red

Ideally Quantum Red id used in situations where the extra power and torque is required, for example moving extra heavy loads, running optimized acceleration, experiencing a wider torque window, or simply to enjoy your vehicle For more information please visit:

Quantum Blue from Quantum Tuning Ltd thumbnail

Quantum Blue

If you want to tune your diesel vehicle and still keep the vehicles safety and durability functions for the engine/transmission/ESP intact, the only way to tune a diesel vehicle is to make changes in the existing control system of the engine. That is exactly what we offer with a Quantum remap. Our tuning process has total control over all parameters at any moment, and we don’t disturb the safety functions of the car, by deceiving the system.