Individual Bar Chair

Individual Bar Chair from Hebei Beton Mesh Reinforcing

By: Hebei Beton Mesh Reinforcing  24/09/2012
Keywords: Individual Bar Chair

Individual Bar Chairs are used to support wide-spaced light steel in slab/deck construction. It is in 3/4", 1", 1-1/2", and 1-3/4" heights.High Chairs for Metal DeckingHigh Chairs for Metal Decking are made with different length legs to fit design of a metal deck.Individual High ChairsIndividual High Chairs are designed to support upper slab steel from mat steel. It also may be used on fill to obtain leg bearing. Their heights are from 2" to 20". Height is from underside of cross bars to seat for reinforcing bar at top of chair. Also available with plastic tip or epoxy coated.Special High ChairsSpecial High Chairs are used for supporting upper slab/deck steel directly or by means of a carrier bar. When heights exceed 12", legs are reinforced with welded cross wires or encircling wire. It is in 2" to 20" heights.Individual High Chair with PlateIndividual High Chair with Plate is used for supporting lower slab steel on fill or other soft material.

Keywords: Individual Bar Chair

Contact Hebei Beton Mesh Reinforcing

Email

Print this page

Other products and services from Hebei Beton Mesh Reinforcing

Reinforcement Spacers from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Reinforcement Spacers

Reinforcement Spacers are available at from 20mm to 360mm in height. Reinforcement Spacer Ensures consistent placement of reinforcement in slabs.


Rebar Support from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Rebar Support

Rebar support is formed cradle to place wire mesh or reinforcing bar.  Foot designed to set on most forming surfaces. Rebar support is used to support horizontal reinforcing steel, wire mesh or post tension cable.


Pipe-Line Reinforced Mesh from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Pipe-Line Reinforced Mesh

Pipe-Line Reinforced Mesh is Pipe-line Reinforced welded wire mesh. Material: Low Carbon Steel wire. Wire Gauge: 1.8mm. Hole: 12*25. Surface: Galvanized.


Ladder Mesh Reinforcement from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Ladder Mesh Reinforcement

Ladder Mesh Reinforcement is widely used for reinforcing wall. With its Raw material: low carbon steel wire, stainless steel wire. Wire diameters are from 2.5mm to 6mm. Width is 5cm, 10cm, 15cm, 20cm. Length is 3mm. Spacing is 40cm.


Continuous High Chair from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Continuous High Chair

Continuous High Chair Upper is used for supporting one layer of steel above another and spacing them to required distance. Continuous High Chair with Plate is used to support slab steel on fill or other soft materials.


Concrete Wire Mesh from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Concrete Wire Mesh

Concrete Wire Meshes have a more dense spacing of the steel bar. Concrete wire mesh is used for coal mine tunnel network protection or reinforcement, concrete pavement.


Concrete Slab Mesh from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Concrete Slab Mesh

Concrete Slab Mesh is Reinforced welded wire mesh panels. This reinforced welded wire mesh panels are made of galvanized welded wire mesh for constructional uses.


Concrete Reinforcing Mesh from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Concrete Reinforcing Mesh

We offer three types of concrete reinforcing meshes: Welded Stainless Steel Panels, Galvanized Welded Panels, and Hot-dip Zinc Welded Panels. Reinforcement Mesh sheets are usually 6m long x 2.4m wide as standard.


Brick Wall Reinforcement Mesh from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Brick Wall Reinforcement Mesh

Brick Wall Reinforcement Mesh, the welding spots of warp wire and weft wire are on the same surface. Its Wire Diameter: 2.5-6.0 mm. Width: 5cm-27cm. Length: 3mm. Spacing: 40cm.