Continuous High Chair

Continuous High Chair from Hebei Beton Mesh Reinforcing

By: Hebei Beton Mesh Reinforcing  24/09/2012
Keywords: Continuous High Chair

Continuous High Chair with Plastic tip provides support for upper slab steel from slab form. It Height is from 2" to 15" in 5'-0" lengths. Legs are spaced 7-1/2" on centers. It is available in bright basic, plastic-protected, galvanized, and epoxy-coated and stainless steel.Application: Support upper slab steel from slab form surface. They are Substitutes for individual chair supports.Continuous High Chair UpperContinuous High Chair Upper is used for supporting one layer of steel above another and spacing them to required distance. Standard leg spacing is 7-1/2" on centers. Heights and lengths are same as slab bolsters. It is made in standard 5'-0" lengths. It is available in bright basic, plastic-protected, galvanized, epoxy-coated and stainless steel.

Keywords: Continuous High Chair

Contact Hebei Beton Mesh Reinforcing

Email

Print this page

Other products and services from Hebei Beton Mesh Reinforcing

Reinforcement Spacers from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Reinforcement Spacers

Reinforcement Spacers are available at from 20mm to 360mm in height. Reinforcement Spacer Ensures consistent placement of reinforcement in slabs.


Rebar Support from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Rebar Support

Rebar support is formed cradle to place wire mesh or reinforcing bar.  Foot designed to set on most forming surfaces. Rebar support is used to support horizontal reinforcing steel, wire mesh or post tension cable.


Pipe-Line Reinforced Mesh from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Pipe-Line Reinforced Mesh

Pipe-Line Reinforced Mesh is Pipe-line Reinforced welded wire mesh. Material: Low Carbon Steel wire. Wire Gauge: 1.8mm. Hole: 12*25. Surface: Galvanized.


Ladder Mesh Reinforcement from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Ladder Mesh Reinforcement

Ladder Mesh Reinforcement is widely used for reinforcing wall. With its Raw material: low carbon steel wire, stainless steel wire. Wire diameters are from 2.5mm to 6mm. Width is 5cm, 10cm, 15cm, 20cm. Length is 3mm. Spacing is 40cm.


Individual Bar Chair from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Individual Bar Chair

Individual Bar Chairs are used to support wide-spaced light steel in slab/deck construction. It is in 3/4", 1", 1-1/2", and 1-3/4" heights.


Concrete Wire Mesh from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Concrete Wire Mesh

Concrete Wire Meshes have a more dense spacing of the steel bar. Concrete wire mesh is used for coal mine tunnel network protection or reinforcement, concrete pavement.


Concrete Slab Mesh from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Concrete Slab Mesh

Concrete Slab Mesh is Reinforced welded wire mesh panels. This reinforced welded wire mesh panels are made of galvanized welded wire mesh for constructional uses.


Concrete Reinforcing Mesh from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Concrete Reinforcing Mesh

We offer three types of concrete reinforcing meshes: Welded Stainless Steel Panels, Galvanized Welded Panels, and Hot-dip Zinc Welded Panels. Reinforcement Mesh sheets are usually 6m long x 2.4m wide as standard.


Brick Wall Reinforcement Mesh from Hebei Beton Mesh Reinforcing thumbnail
24/09/2012

Brick Wall Reinforcement Mesh

Brick Wall Reinforcement Mesh, the welding spots of warp wire and weft wire are on the same surface. Its Wire Diameter: 2.5-6.0 mm. Width: 5cm-27cm. Length: 3mm. Spacing: 40cm.