BW and BRUK line : welded or assembled metallic retention bund for medium voltage transformers
By:
AKHELEC
26/04/2011
Keywords:
oil, fire protection, Fire
BRW Line – WELDED RETENTION BUNDS
For 100 to 3,150 kVA transformers as standard. Inductance oils, capacitors, etc... when transformer is new or can be lifted on site.
BRUK Line – ASSEMBLED RETENTION BUNDS
For 100 to 3000 kVA transformers as standard, inductance oils, capacitors, etc... Tanks specially designed to be installed under existing equipment, only requiring transformers to be lifted a few centimetres.
Liquid tightness is assured by a high temperature resistant silicone pre punched strip seal.
Other parts are bolted together using liquid high temperature resistant silicone seal.
Optional:
Emptying valve;
Outdoor use Kit composed of: Siphon an Petro-PITÒ :
filtration system of FILTRELEC® range fitted to the bund wall allowing rainwater to drain whilst trapping traces of hydrocarbon
(additional documentation available on request);
Sound dampening blocks to be placed under the bund
(plates or springs for 99% absorption);
Insulating PTFE plates.
Internal beam to raise the transformer above rain water.
Keywords:
Bund,
Bunding,
dielectric,
distribution transformers,
electric motors,
Electric Transformer,
Electric Transformers,
Electrical Engineers,
environmental solutions,
environnement,
extinghuisher,
Fire,
fire protection,
High Voltage Transformers,
hydrocarbons,
Low Voltage,
oil,
oil retention,
Oil Spill Response,
PCB,
Pcbs,
pits,
pollution,
pollution control,
power transformers,
rainwater,
retention bund,
retention pit,
spill,
Substation,
Transformer,
transformer bund,
transformer bunding,
Transformers,
Used Oil,